[KBA-01251] Unit motion detection options not available for MPEG-4 streams on AXIS 216FD units - Omnicast™ 4.8

series
Omnicast™ 4.8
revised_modified
2013-11-29

[KBA-01251] Unit motion detection options not available for MPEG-4 streams on AXIS 216FD units

This article explains why you cannot select unit motion detection options when configuring an AXIS 216FD unit that is set to use an MPEG-4 stream.

Symptoms

When setting motion detection options in Config Tool for an AXIS 216FD unit, you cannot select the Full screen (Unit) or Detection zone (Unit) options if the unit is set to use an MPEG-4 stream.

Cause

A coding issue causes this error.

Workaround

Use software motion detection options. Alternatively, to use hardware motion detection, switch to an MJPEG stream.

Status

This issue is resolved in Omnicast™ 4.8 SR5 and later.