[KBA-00126] Disabling inputs on Verint multichannel encoders in Omnicast™ - Omnicast™ 4.0 - 4.8

series
Omnicast™ 4.0 - 4.8
revised_modified
2014-03-17

[KBA-00126] Disabling inputs on Verint multichannel encoders in Omnicast™

This article explains how to disable inputs on Verint encoders in Omnicast™.

Summary

Not all Verint multichannel encoders can have ports disabled. The best way to verify if you can disable ports on your unit is to check on the unit itself.

More Information

  1. In Windows, telnet into the unit by going to Start > Run > Telnet x.x.x.x, where x is the IP address of the encoder.
  2. Click Advanced menu > Video menu.
  3. Go to the port you want to disable (for example, Video Encoder #2).
  4. To disable the port, type 0.
  5. Return to the main menu.
  6. Click Save.
  7. Reboot the unit.