Enabling Security Center video and access control features in the SV Control Panel - SV Control Panel | Streamvault

Streamvault™ Appliance User Guide

Applies to
SV Control Panel | Streamvault
Last updated
2023-11-03
Content type
Guides > User guides
Language
English
Product
Streamvault™

The Security Center installer assistant wizard guides you through setting up the main features of video surveillance and access control.

What you should know

Settings that you apply in the assistant can be changed later in Config Tool.

Applies to: Appliances that host the Directory role, such as All-In-One appliances

Procedure

  1. Log on using an Admin user.
    Tip: If your Security Center password is different from the Windows admin password, log on to Security Center using the password credentials specified in the Streamvault Control Panel setup wizard.
    The Security Center installer assistant opens.
  2. After reading the Intro page, click Next.
  3. On the Available features page, choose the features you want and click Next.
    Basic features are enabled by default. You can enable and disable features later on the Features page in the General settings view of the System task.
    NOTE: If your license does not support a feature, it is unavailable in the list.
  4. On the Camera security page, specify the default username and password that is used for all your cameras, and then click Next.
    Tip: For added security, select Use HTTPS.
  5. On the Camera quality settings page, configure the following options:
    Resolution
    • High: 1280x720 and higher
    • Standard: More than 320x240 and less than 1280x720
    • Low: 320x240 and lower
    • Default: Manufacturer’s default settings

    The camera always uses the highest resolution that it can support from the chosen category. If the camera does not support any resolutions from the chosen category, it uses the highest resolution that it can support from the next category. For example, if the camera cannot support a High resolution, it uses the highest resolution it can support from the Standard group.

    Settings on this page can be modified later from the Camera default settings page of the Archiver role.
  6. On the Recording settings page, select the default recording settings to apply to all cameras:
    Off
    Recording is off.
    Continuous
    Cameras record continuously. This is the default setting.
    On motion/Manual
    Cameras record when triggered by an action (such as Start recording, Add bookmark, or Trigger alarm), by motion detection, or manually by a user.
    Manual
    Cameras record when triggered by an action (such as Start recording, Add bookmark, or Trigger alarm), or manually by a user.
    NOTE: When the Manual setting is used, then motion does not trigger any recording.
    Custom
    You can set a schedule for when recording occurs.
  7. Click Next.
  8. On the Access control unit security page, specify the default username and password for all your Access control units, and click Next.
  9. On the Cardholders page, select how you want to add your credentials (cards) and cardholders.
    1. Select whether you want to add cardholders (when the Security Center installer assistant closes) using the Cardholder management task, or by using the Import tool.
    2. Click Next.
  10. On the Users page, add more users to your system:
    1. Enter the username.
    2. Select the User Type:
      Operator
      An operator can use the Monitoring task, view video, and manage visitors in Security Desk.
      Reporting
      A reporting user can use the Security Desk application and run the most basic reporting tasks, excluding the tasks for AutoVu™ ALPR. A user who only has reporting privileges cannot view any video, control any physical devices, or report incidents.
      Investigator
      An investigator can use the Monitoring task, view video, control PTZ cameras, record and export video, add bookmarks and incidents, use investigation tasks, manage alarms and visitors, override door unlock schedules, save tasks, and so on.
      Supervisor
      A supervisor can use the Monitoring task, view video, control PTZ cameras, record and export video, add bookmarks and incidents, use investigation tasks, manage alarms and visitors, override door unlock schedules, save tasks, and so on. In addition, a supervisor can also use maintenance tasks, manage cardholders and credentials, modify custom fields, set threat levels, block cameras, and perform people counting.
      Provisioning
      A provisioning user has most of the configuration privileges, except for the following: managing roles, macros, users, user groups, custom events, activity trails, threat levels, and audio files. The provisioning user is typically a system installer.
      Basic AutoVu Operator
      This user type is for operators who use AutoVu ALPR. The Basic AutoVu user can use ALPR tasks, configure ALPR entities, create ALPR rules, monitor ALPR events, and so on.
      Patroller User
      This user type is for Genetec Patroller™ users who use AutoVu ALPR. The Patroller user can use ALPR tasks, configure ALPR entities, create ALPR rules, monitor ALPR events, and so on. A Patroller user does not have access to other Security Center applications, for example, Config Tool, and Security Desk. The Patroller user cannot modify reports or change the Patroller password.
  11. Enter and confirm the Password, and then click Add.
    The new user is added to the list of users on the right of the dialog box. To delete a user, select a user from the list, and click .

    You change the user profiles in the Users view of the User Management task.

  12. Click Next.
  13. Confirm that the information on the Summary page is correct, and then click Apply, or click Back to fix any errors.
  14. On the Conclusion page, click Restart.
    Config Tool restarts to apply your settings.
    NOTE: The Open the unit enrollment tool after wizard closes option is selected by default. You can clear this option and open the Unit enrollment tool at a later time by clicking the Enroll cameras and controllers shortcut on the Home page of the SV Control Panel.

After you finish

Add units to your system, using the Unit enrollment tool.