Adding SIP trunks - Sipelia™ 2.6

Sipelia User Guide 2.6

series
Sipelia™ 2.6
revised_modified
2017-11-13

To connect to SIP servers other than Sipelia Server, you can add a SIP trunk in Config Tool, and then define applicable dial plan rules to make and receive calls between the SIP servers.

What you should know

SIP trunks work together with dial plans. For example, to connect Sipelia Server to another SIP server (SIP Server A) through a SIP trunk, you must define dial plan rules that instruct Sipelia Server about which calls to reroute through the trunk and on towards the new SIP extension destinations that are registered to SIP Server A. Furthermore, if you want proper two-way communication between Sipelia Server and SIP Server A, both SIP servers need to be configured accordingly.

Procedure

  1. Log on to Security Center with Config Tool, and then open the Plugins task.
  2. Select the Sipelia™ Plugin role, and then click SIP trunks.
  3. Click Add SIP trunk.
  4. In the Name field, enter a descriptive name for your SIP trunk. The name of the SIP trunk must be unique, because it will be used in the dial plan rules involving this SIP trunk.
    For the purposes of this example, let's name the SIP trunk TrunkSIPServerA for SIP Server A.
  5. Enter the following:
    IP address
    The IP address of the SIP server that you want to connect Sipelia Server to.
    SIP port
    The port used by the SIP trunk to communicate with the Sipelia Server. Because SIP trunks are SIP servers, the default value is 5060.
    Let's assume that the IP address of TrunkSIPServerA is the following: 10.150.4.100. And, as stated above, the default port is 5060.
  6. Click Add, and then click Apply.

Results

The SIP trunk TrunkSIPServerA has been added. The LED in the first column indicates the state of the trunk: green for online and red for offline.

IMPORTANT: The SIP extension configured for an intercom entity in Security Center is the unique identifier of this entity. For intercoms connected to an Intercom Exchange Server connected with a trunk to Sipelia, this SIP extension must be the extension used to call the intercom. This extension must also be the identifier used by the intercom to call Sipelia clients. The Dial Plan rules must be properly configured for these extensions to match.

After you finish

To call extensions registered on TrunkSIPServerA, define the applicable dial plan rules.