[KBA-00062] "Invalid configuration in unit" event in Omnicast™ - Omnicast™ 4.0 - 4.8

series
Omnicast™ 4.0 - 4.8
revised_modified
2010-09-14

[KBA-00062] "Invalid configuration in unit" event in Omnicast™

This article explains the different codes that can be associated with an Invalid configuration in unit event in Omnicast™.

Summary

In Omnicast™, you can receive an Invalid configuration in unit event when you are trying to configure a parameter that the unit does not support.
Example: If you set 2CIF-H as the video data format for an S1502e unit with a value of 10 or more, you will receive the Invalid configuration in unit event because the unit only supports an image quality of 9 or less.

More Information

The most common Invalid configuration in unit events related to unit parameters are the following:

Parameter Value
Video configuration
Video data format 0x1011
Frame rate 0x1013
Bit rate 0x1016
Key frame interval 0x1017
Image quality 0x1015
Brightness attribute 0x1001
Contrast attribute 0x1002
Hue attribute 0x1005
Saturation attribute 0x1007
Audio configuration
Sampling rate 0x2012
Data format 0x2011
Channel 0x2013
Input type 0x2010
Pitch 0x2001
Volume 0x2002
Audio mode 0x2030
Serial configuration
Data bits 0x3002
Parity 0x3003
Stop bits 0x3004
Baud rate 0x3001
Linedriver 0x3009