Installing Cloud Archives - Cloud Archives 5.8 GA

Cloud Archives User Guide 5.8 GA

series
Cloud Archives 5.8 GA
revised_modified
2019-08-28

You must install Cloud Archives on each server that hosts the Archiver role or Auxiliary Archiver role that will use the service. Also, you must install Cloud Archives separately from Security Center.

Before you begin

  • Install Security Center 5.3 GA or later.
  • Prepare your files for cloud archiving.
  • Make sure that TCP ports 80 (HTTP) and 443 (HTTPS) are opened for uploading to the cloud.
  • Make sure you have a License.cal file ready to be activated.

What you should know

  • Cloud Archives must be installed on each server that hosts an Archiver role or an Auxiliary Archiver role from which video archives will be uploaded to the cloud.
  • Motion search is not supported by the Archivers and Auxiliary Archivers with Cloud Archives.
  • Archiver statistics displayed in Config Tool are not accurate with Cloud Archives.
  • Cloud Archives does not support network shared drives used by Archivers and Auxiliary Archivers for recording. Local drives must be used.

Procedure


  1. In the installation package, double-click the setup.exe file and follow the installation instructions.
  2. On the Installation Wizard Completed page, select Launch Genetec Security Center Cloud Archives, and then click Finish.
  3. In the Video Encryption dialog box, enter and confirm an encryption password, and then click Next.

  4. Select whether to install on the Archiver or the Auxiliary Archiver, and then click Next.
    If you select Archiver, the video recorded by all the Archiver roles hosted on the server on which you installed Cloud Archives will be uploaded to the cloud.
  5. In the License dialog box, do one of the following:

    • Paste your license information from the License.cal file. You can open this file with a text editor.
    • Browse for the License.cal file, and then click Open.
  6. Click Activate.
  7. When the successful installation of Cloud Archives is confirmed, click OK.
  8. Click Restart Archiver.

    If you chose to install Cloud Archives on an Auxiliary Archiver, Restart Auxiliary Archiver is displayed instead.

After you finish

Configure Cloud Archives.