Genetec Patroller™ 6.5 computer hardware requirements for SharpX - Genetec Patroller™ 6.5

Genetec Patroller System Requirements 6.5

series
Genetec Patroller™ 6.5
revised_modified
2020-05-15

The following computer hardware is required for SharpX systems using Genetec Patroller™ 6.5.

NOTE: Only the Panasonic Toughpad is certified. If you don’t use a Toughpad then make sure your system meets these requirements.
Minimum
  • Intel® Core™ Duo U2500 Ultra Low Voltage @ 1.2 GHz, 2 MB cache (or equivalent).
  • 4 GB of RAM
  • 80 GB hard drive or more
  • 1024 x 768 or higher screen resolution
  • 100/1000 Ethernet Network Interface Card
  • USB ports
  • Touchscreen
  • Integrated speakers
Recommended
  • Intel Core i5-3320M vPro Processor @ 2.6 GHz
  • 4 GB of RAM
  • 80 GB hard drive or more
  • 1024 x 768 or higher screen resolution
  • 100/1000 Ethernet Network Interface Card
  • USB ports
  • Touchscreen
  • Integrated speakers
High performance
  • Intel Core i5-6300U Processor @ 2.4 GHz
  • 8 GB of RAM
  • 128 GB SSD hard drive
  • 1024 x 768 or higher screen resolution
  • 100/1000 Ethernet Network Interface Card
  • USB ports
  • Touchscreen
  • Integrated speakers
NOTE: If installed inside a vehicle, the Genetec Patroller™ computer must be a ruggedized computer.