If the video you are monitoring is jittery or is dropping frames, use the rendering rate video statistic to determine whether the workstation is the cause.
Rendering rate is the comparison of how fast the workstation renders a video with the speed the workstation receives that video from the network. The rendering rate video statistic is made up of:
What you should know
- The speed at which the workstation processes video, which indicates how much load is on the workstation's CPU and memory.
- The speed at which the network is sending video to the workstation.
- Select the tile that is playing video.
Video stream statistics are displayed in the tile.
If your rendering rate is "13.49 rendered fps on 21.07 fps", your workstation is processing 13.49 fps. However, it is receiving video at 21.07 fps. The workstation cannot process all the frames it is receiving. Your workstation is the cause of the degraded quality of the video you are monitoring. In this case, lighten the load and check the hardware and its drivers.
- Reduce the number of cameras you are monitoring to reduce the load on the workstation.
- Check the hardware requirements to make sure the workstation can handle the load.
- Check that the graphic card is up to date.
- Check that the network card is up to date.
- Ensure all drivers are up to date.
If your rendering rate is "13.49 rendered fps on 13.49 fps", your workstation is processing every frame that it is receiving from the network. In this case, compare the second value to the camera's configured fps rate to determine whether the network is not sending all the frames it is receiving from the camera. If there is a difference in these two rates, either the camera or the network is the cause of the video degradation.
- Check the camera's firmware.
- Check the health of the network.