This section describes all default ports used by Genetec Patroller™. You can allow the Genetec Patroller™ setup program to automatically open these ports, or you can open them manually.
Computer | Inbound | Outbound | Port usage |
---|---|---|---|
Genetec Patroller™ in-vehicle computer | HTTP 8001 | Communication with Simple Host. | |
TCP 4545 | TCP 4545 | Communication from the mobile Sharp units. | |
TCP 4546 | Time synchonization service for Sharp units. | ||
TCP 8899 | Used by the Patroller’s Updater Service to communicate with the mobile Sharp units (mobile Sharps are updated through Genetec Patroller™). | ||
TCP 8666 | TCP 8666 | Used by Genetec Patroller™ and the Plate Reader Server (Sharp software) to communicate with their Updater Service. | |
TCP 8787 | Used by Genetec Patroller™ to communicate with Pay-by-Plate plugin. | ||
HTTP 2323 | Used by the Genetec Patroller™ and the Sharp to determine which Extension to load. | ||
UDP 5000 | Used to discover connected mobile Sharp units. | ||
TCP 8731 | Communication to the LPR Manager role. | ||
TCP 8889 | Used to notify the mobile Sharp’s Updater Service to connect to the Patroller’s Updater Service on a specific address and port (Updater Service discovery). | ||
TCP 8832 | Used to communicate with the LPR Manager role for updates (used by Patroller’s and fixed Sharps). |