Enabling Genetec Patroller™ Map settings - Genetec Patroller™ 6.5

Genetec Patroller™ Administrator Guide 6.5

Applies to
Genetec Patroller™ 6.5
Last updated
2020-05-15
Content type
Guides
Guides > Administrator guides
Language
English
Product
Genetec Patroller™
Version
6.5

If you’re using Genetec Patroller™ with maps, you must select the Genetec Patroller™ mapping option to use, and configure the related settings.

Before you begin

If you’re using maps, you must install the BeNomad files, Patroller’s mapping solution.

Procedure

  1. Open Genetec Patroller™ Config Tool.
  2. Go to Navigation > Maps.
  3. From Mapping type, select BeNomad.
    The default map type for AutoVu™.
  4. Configure the following settings:
    Show vehicle route
    Displays a trail behind the Genetec Patroller™ icon that allows you to see the route Genetec Patroller™ has taken. Turn this setting off to show only the Patroller’s current position.
    Show parking lots overlay
    Turn on to display configured parking lots on the map in the Genetec Patroller™ main viewer.
    Snap to road threshold
    Specify the maximum distance error (in meters). If the distance between the vehicle and the closest map item is greater than this value, no snapping will occur.
  5. Click Apply.

Results

Genetec Patroller™ mapping settings are configured.