Installer (MSI) options - Security Center 5.7 SR1

Security Center Installation and Upgrade Guide 5.7 SR1

series
Security Center 5.7 SR1
revised_modified
2018-01-23

When performing a silent installation, you can specify additional options for the Security Center Installer (MSI).

The following table lists the Security Center Installer (MSI) options. All installer options are written in capital letters. Unlike the setup options, none of them are preceded with a forward slash (/). All options names are case sensitive.

IMPORTANT: Beginning with Security Center 5.6, all servers on the system share the same password. Therefore, for the installation of both main and expansion servers, only use the option MAINSERVER_PASSWORD to specify the password.
Installer (MSI) option Description
ACTIVATIONCODE This is the activation code required to allow System Availability Monitor Agent (SAMA) to collect system data.

EXAMPLE: SAMA_COLLECTPOLICY=On ACTIVATIONCODE=mycode

AGREETOLICENSE Indicate that you agree with our software license agreement.
CAUTION:
The only accepted value is Yes. If omitted, the installation would fail.

EXAMPLE: AGREETOLICENSE=Yes

COLLECTPOLICY Configure the data collection policy for our Product Improvement Program. The possible values are:
  • On: We will collect data with system information.
  • Anonymous: We will collect anonymous data.
  • Off: We will not collect data.
CAUTION:
This option is mandatory if you are installing the main server on a clean machine. If omitted, the installation would fail.

You can also use this option to change the existing data collection setting if you are upgrading the main server. It is ignored if you are installing an expansion server or a client workstation.

EXAMPLE: COLLECTPOLICY=Anonymous

CREATE_FIREWALL_RULES Add the installed Security Center applications to the Windows Firewall exceptions list. Possible values are 0 or 1.
  • 0 = Do not create firewall rules
  • 1 = Create firewall rules (DEFAULT)

EXAMPLE: CREATE_FIREWALL_RULES=1

DATABASE_AUTOBACKUP Back up the Directory database after the software upgrade, but before the database upgrade. Configuration Files are also backed up in the same destination folder as the database. Possible values are 0 or 1. When this option is omitted, the default value is 1 if the last backup is more than one day old. The default backup folder is C:\SecurityCenterBackup on the SQL Server machine.
  • 0 = Do not back up the Directory database
  • 1 = Back up the Directory database (DEFAULT)

EXAMPLE: DATABASE_AUTOBACKUP=0

DATABASE_SERVER Same as GLOBAL_SERVER option. This parameter maintains backward compatibility with previous silent installation scripts.
DEACTIVBASIC This is a Boolean value that specifies whether basic camera authentication should be deactivated.
  • 0 = Basic authentication enabled
  • 1 = Basic authentication disabled (DEFAULT)

EXAMPLE: DEACTIVBASIC=0

GLOBAL_SERVER Specify the database server name for all roles installed by default. When omitted, the default value is (local)\SQLEXPRESS.

EXAMPLE: GLOBAL_SERVER=BLADE32\SQLServerEnterprise

LANGUAGECHOSEN Language used by Security Center. The possible code values are:
  • Arabic - 1025
  • Chinese (Simplified) - 2052
  • Chinese (Traditional) - 1028
  • Czech - 1029
  • Dutch - 1043
  • English - 1033
  • French - 3084
  • German - 1031
  • Hebrew - 1037
  • Hungarian - 1038
  • Italian - 1040
  • Japanese - 1041
  • Korean - 1042
  • Norwegian - 1044
  • Persian - 1065
  • Polish - 1045
  • Brazilian Portuguese - 2070
  • Russian - 1049
  • Spanish - 1034
  • Swedish - 1053
  • Thai - 1054
  • Turkish - 1055
  • Vietnamese - 1066

EXAMPLE: LANGUAGECHOSEN=3084

If the code is invalid, English will be used. If this option is omitted, the installation language (specified with the /language: setup option) will be used.

MAINSERVER_ENDPOINT Used for expansion server installation. Specify the name or IP address of the main server.

EXAMPLE: MAINSERVER_ENDPOINT=MYMAINSERVER

MAINSERVER_PASSWORD Mandatory option for server installation commands.
CAUTION:
The password must be at least 8 characters long. If the password is too short, the installation would fail.

EXAMPLE: MAINSERVER_PASSWORD=serverpassword

PRODUCT_UPDATES Turn the automatic check for software updates ON or OFF. Possible values are:
  • true - Turn the automatic check ON (DEFAULT)
  • false - Turn the automatic check OFF
REBOOT Use this option to force or suppress a reboot after the Server installation has ended. Possible values are:
  • F - To force a reboot when your installation is complete.
  • S - To suppress any reboot except the one caused by the ForceReboot action.
  • R - To suppress any reboot caused by Windows Installer actions. (DEFAULT)
SAMA_COLLECTPOLICY Configure the data collection policy applied by the SAMA. The possible values are:
  • On: SAMA will collect data with system information (requires ACTIVATIONCODE).
  • Anonymous: SAMA will collect anonymous data (DEFAULT)
  • Off: SAMA will not collect data.

EXAMPLE: SAMA_COLLECTPOLICY=On ACTIVATIONCODE=mycode

SECURE_COMMUNICATION This is a Boolean value that specifies whether secure communication (Directory authentication) should be enforced.
  • 0 = Not enforced, Directory authentication turned off (DEFAULT)
  • 1 = Enforced, Directory authentication turned on

EXAMPLE: SECURE_COMMUNICATION=1

SERVER_TYPE Specify whether to install a main or an expansion server. The possible values are:
  • Main: Install Genetec™ Server with Directory (DEFAULT)
  • Expansion: Install Genetec™ Server without Directory
SERVERADMIN_PASSWORD OBSOLETE. DO NOT USE. Use MAINSERVER_PASSWORD instead.
SERVERADMIN_PORT Specify the HTTP port for the web-based Server Admin.

EXAMPLE: SERVERADMIN_PORT=8080

If not specified, the default is 5500.

SERVICEPASSWORD Specify the password to use in the services.

EXAMPLE: SERVICEPASSWORD=anypassword

User and password need to be created first with the right credentials before using those properties. If not specified, the default is blank.

SERVICEUSERNAME Specify the username to use in the services.

EXAMPLE: SERVICEUSERNAME=.\admin

SKIPSERVICESTART Use this option to prevent the Security Center services from starting immediately after the installation (default behavior). You can use this option, if for example, you need to install hotfixes right after the full installation. If you use this option, don’t forget to start the Security Center services (NET START GenetecServer and NET START GenetecWatchdog) after the hotfix installation.

EXAMPLE: SKIPSERVICESTART=Y

SQL_INSTANCE_NAME Specify the new SQL Server instance's name. This option needs to be specified when SQLSERVER_GROUP has a value of NewServer.
SQLSERVER_GROUP Specify if a new or an existing SQL server is silently installed. The possible values are:
  • NewServer (must be used with SQL_INSTANCE_NAME)
  • ExistingServer (DEFAULT)
UPGRADE_DATABASE Specify that the Directory database should be automatically upgraded. If no database exists, this option is ignored. Possible values are Y or N. When this option is omitted, the default value is Y.

EXAMPLE: UPGRADE_DATABASE=N

WEBSERVER_PORT Specify the HTTP port for the web-based Server Admin.

If not specified, the default is 80.