Configuring MIFARE DESFire in Synergis™ Softwire 10.7 - Synergis™ Softwire 10.7

Synergis™ Appliance Configuration Guide 10.7

series
Synergis™ Softwire 10.7
revised_modified
2018-03-27

To enable MIFARE DESFire on your Synergis™ Cloud Link, you must load the configuration file, then associate the configuration with your STid or OSDP readers.

Before you begin

Configure STid or OSDP readers. For more information, see the Synergis™ Softwire Integration Guide.

Procedure

  1. Click Configuration > MIFARE DESFire.
  2. Click Select smart cards sites file, and browse to either your custom configuration file (SmartCardsSites.xml) or the default file that came with your Security Center installation.
  3. Click Upload.
    You will see a message that reads "Upload successful."
  4. Associate the readers and MIFARE DESFire configurations:
    1. For each reader, select a site from the Available configurations list.
    2. Click Add.
  5. Click Save.
    You will be prompted to do a software restart.

  6. Click Restart now.