SharpOS 13.1 Sharp Portal - Overview page - SharpZ3 | SharpOS 13.1

SharpZ3 Administrator Guide 13.1

series
SharpZ3 | SharpOS 13.1
revised_modified
2020-07-14

This section lists the settings found in the Overview page of the Sharp Portal and provides general information about the SharpZ3, such as serial number, license, IP address, input and relay status, and so on.

To navigate to the Overview page, click Configuration > Overview.

Camera info

The following information is displayed:

Serial number
Displays the SharpZ3 hardware serial number.
License
Displays whether the SharpZ3 license is valid, invalid, or missing.
Inputs
Displays the inputs on the SharpZ3 and whether the input is in a High or Low state. A high-state input is indicative of a voltage of 5.75 V or higher. A low-state input is indicative of a voltage of 4.80 V or lower.
Relays
Displays the SharpZ3 relays and whether the relay state is Opened or Closed. The SharpZ3 has two 0.25 A solid-state relays and two 8 A electromechanical relays.
Test relays
Click to toggle your configured relay between Opened and Closed to validate the configuration.
Mac address
Displays the MAC address of the SharpZ3. This information might be requested if you contact technical support.
Type
Displays the type of Sharp unit.
Platform
Displays the software image installed on the SharpZ3. If you contact technical support, you might be asked to provide this number.
Version
Software
Displays the SharpOS version currently installed.
Firmware
Displays the update status of the Sharp unit.
Details
Provides additional information about the versions of the files and components included in the package.
Displays the SharpOS package version. You can use this information to confirm that your SharpZ3 is up to date.
Cameras
Displays the resolution and the lens focal range available for cameras connected to the SharpZ3 unit.

Connectivity

The following information is displayed:

IP addresses
Displays the IPv4 and IPv6 address of the SharpZ3.
Internet
Displays whether the SharpZ3 is connected to the Internet.

Storage and usage

You can view information about reads stored on the SharpZ3, CPU usage, and memory usage. Indicator lines, usually green or orange, are provided so you can see the status. If an indicator line stays red for a prolonged period of time, it indicates either high CPU activity or that there is a problem.

Reads stored
Indicates the reads stored in the database of the SharpZ3. The number of reads is also displayed.
Memory
Displays information on the system's RAM memory.
CPU (Total)
Indicates the total CPU usage of the SharpZ3. Click Show details to see the usage for each CPU.

Last activities

Unit rebooted
Indicates the last time the unit was restarted.
Software restarted
Indicates the last time the PlateReader software was restarted.