Configuring the SharpZ3 HTTP/HTTPS extension in the SharpOS 13.1 Sharp Portal - SharpZ3 | SharpOS 13.1

SharpZ3 Administrator Guide 13.1

series
SharpZ3 | SharpOS 13.1
revised_modified
2020-07-14

You can configure the SharpZ3 to send ALPR data to an HTTP server instead of to Genetec Patrollerâ„¢. ALPR data that is sent to an HTTP/HTTPS server can then be integrated by third-party applications.

What you should know

You can only configure one extension for the SharpZ3 camera.

Procedure

  1. Log on to the Sharp Portal.
  2. From the Configuration menu, click Connectivity > Extension.
  3. From the Active extension section, select HTTP/HTTPS from the Extension type menu.
  4. Configure the following:
    Server
    Enter the server name and location of the third party receiving HTTP server.
    Format
    Select the format you want to send the ALPR data in. You can select either JSON or XML format.
    Username
    Enter the username for the server.
    Password
    Enter the password for the username.
    Export context images
    Export the context image (in JPEG format).
    Export ALPR images
    Export the plate image (in JPEG format).
    Retain data when the connection is lost
    Select this option for plate reads to be saved locally in the SharpZ3 database if the connection with the server is lost. The system attempts to reconnect with the server every 30 seconds. Stored reads are pushed to the server when the connection is reestablished.
    IMPORTANT: If there are any plate reads in the SharpZ3 database, clearing this check box and saving the configuration deletes the plate reads.
    Anonymize ALPR data
    The camera hashes the license plate using the SHA-1 algorithm. When you add an alphanumeric salt (cryptography) to the license plate number, it increases the security of the hashed output. Adding the same salt on all of the cameras in a network means that the same license plate produces an identical hash on all cameras. This allows the external system to recognize the identical hashes as a the same vehicle while still maintaining privacy.
    IMPORTANT: If the salt is changed after it is set, it must also be changed on all other cameras. Changing the salt breaks the link between old reads and new reads.
    Ignore certificate errors
    Select this option when sending ALPR data to an HTTPS server that does not have a trusted certificate. The SharpZ3 does not send the ALPR data to an HTTPS server that does not have a trusted certificate unless you select this option.
  5. Click Send sample to send a test plate to verify that the system can connect to the server using these settings.
  6. Click Save.