By default, RabbitMQ uses port 5671 for SSL communication. If you want to change the
default port numbers used by Genetec Mission Controlâ„¢, you must
either change it during the installation process or change the port in the RabbitMQ.conf
file.
Procedure
-
Update the RabbitMQ.conf file.
-
On the machine where Mission Control is
installed, navigate to Computer\Local Disk
(C:)\ProgramData\Genetec\RabbitMQ\conf.
-
Open the RabbitMQ.conf file in a text editor.
-
To change the SSL port from the default (5671 is selected by default during
installation), modify the line:
listeners.ssl.default = 5671
-
To change the HTTPS API port from the default (15671), modify the line:
management.ssl.port = 15671
-
Save and close the RabbitMQ.conf file.
-
In the Services tab of the Windows Task Manager, restart the RabbitMQ service.
-
Update the ports in the Incident Manager role to match the port information in the
RabbitMQ.conf file.
-
From the Config Tool home page, open
the System task, and click the Roles
view.
-
Select the Incident Manager role, and click the RabbitMQ
tab.
-
Select the server you want to modify and click Edit the item
().
-
Enter the new port number and click Apply.
NOTE: You can modify either or both of the port information depending.
-
If you have modified the ports on more than one RabbitMQ server, and if those
servers are listed, then you must also edit the port for those servers.