Genetec Patroller™ 6.6 includes the following known limitations.
|2592393||Genetec Patroller™ cannot store images larger than 80 KB if Windows is installed in 32-bit mode. To store larger images, 64-bit mode is required.|
|2506954||If the in-vehicle computer's clock is not in sync with Curb
Sense™, it is not possible to log in to
Workaround: In the Windows Date & time settings page, enable the setting Set time automatically.
|2489688||Context images taken while the patrol vehicle is traveling faster than 40 km/h (25 mph) might be slightly distorted. For example, vehicle tires might appear slightly oval in shape.|
|2484808||It is not possible to enable FILESTREAM on a 32-bit version of SQL Server
running on a 64-bit operating system.
Workaround: Uninstall the 32-bit version of SQL Server and install the version packaged with the Genetec Patroller™ installer.
|2478659||If you disable FILESTREAM manually on the SQL Server Express server, you must either manually reactivate FILESTREAM or reinstall Genetec Patroller™ for the system to operate.|
|2438460||Upgrading a system to Genetec Patroller™ 6.5 SR4 or later requires a database update that erases all operational information. Before upgrading Genetec Patroller™, offload all license plate reads and hits.|
|2101419||When you view a license plate read in Security Desk that includes additional images from context cameras or wheel imaging cameras, these images are displayed in a certain order in the plate read overview image. If any of the cameras are disconnected at the time of the plate read, the overview image will have an empty tile in the bottom-right corner. For example, if the vehicle includes context cameras A, B, C, and D, and camera B is offline, the plate read overview image might display A, C, D, empty.|
|1870065||When registering a patrol vehicle with Plate link, if you enter an email
address that is not associated with an authorized users account, the registration
fails and the login window is not displayed again.
NOTE: Only authorized users can manage patrol vehicles in the AutoVu™ Portal. For more information, contact your Genetec Inc. representative.
Workaround: Restart the Genetec Patroller™ Config Tool and restart the Plate link vehicle registration.
|472102||In SharpX mobile installations where the SharpXS ALPR Processing Unit includes the Navigation option, the ALPR Processing Unit must not be installed with the face plate pointing down or up. For more information on hardware orientation, refer to the AutoVu Hardware Guide for SharpX Mobile Installation.|
|296429||Time limited parking: If the configured "Duplicate hit delay" period is greater
than the Overtime rule, duplicate hits are raised during that period.
Workaround: Always configure the Overtime rule to be longer than the duplicate hit delay period.
|227487||To use overtime enforcement over a period of 24 hours or more, the Overtime rule regulation Applicable hours must be set to All Day. If Applicable hours is set to a time range, then an overtime hit is not raised on the second day. For example, if you have a 1 hour overtime rule that is configured with a specific time of day of 8:00-18:00 and is applicable all week long, a plate read on Monday at 17:00 will not raise a hit on Tuesday if it is read at any time between 8:00-18:00.|
|225947||When creating a New Wanted without entering an expiry date, the entry will expire based on the Store Hits setting (default is 120 hours). You can edit the expiry date but once it is edited, you cannot edit it again to set the value back to undefined.|
|213853||When using the Plate Copy plugin with Copy plate number to Windows clipboard setting enabled, the plate number copied to the XML file does not correspond to the plate number that was selected in Genetec Patroller™ for overtime and shared permit hits.|
|134674||If multiple plates have the same plate number but different issuing states,
provinces, or countries (for example, ABC123 from NY and ABC123 from NJ), hotlist or
permit list changes transferred to Genetec
Patroller™ may not be accurate.
NOTE: This issue occurs with live hotlist or permit list transfers only; USB transfer is not affected.
Workaround: To avoid this issue, make sure you are running the latest versions of both Security Center and Genetec Patroller™.
|100763||Windows 7: If you install Microsoft update KB2670838, context images of license
plate reads might not appear in Genetec
Workaround: Install update KB2836502. For more information, see https://support.microsoft.com/en-us/kb/2836502.
Patroller™ raises permit and shared
permit hits for the same vehicles that already have similar hits pending
acknowledgment. For example, if Genetec
raises a permit hit for license plate ABC123, it should not raise another permit hit
for that plate (for the same violation) until you either accept or reject the first
Workaround: Whenever possible, accept or reject hits as they occur. Try not to leave many hits pending.
|59320||After you acknowledge (accept or reject) a hit in Genetec
Patroller™, the hit icon on the map turns grey,
which is the same color as a read. As a result, you cannot differentiate between
reads and acknowledged hits by looking at the map. This applies to all types of hits
(hotlists, permits, overtime, etc).
Workaround: To view acknowledged hits in Genetec Patroller™, tap Hits, and then tap Review.
Patroller™ switches from live reading
to the list of unacknowledged hits, even when new hits are automatically rejected.
For example, when you set an acknowledgment buffer, you specify a limit to how many
hits can remain unacknowledged before Genetec
Patroller™ rejects all subsequent hits. After this
limit is reached, a hit causes Genetec
switch from live plate reading to the list of unacknowledged hits, even though the
new hit is automatically rejected and does not require user interaction.
Workaround: You need to switch back to live reading every time you receive a new hit, or clear the list of unacknowledged hits.