Adding your Blighter server as a tracking system to Security Center - Restricted Security Area Surveillance

RSA Surveillance Integration Guide for Blighter Radar Systems
Applies to
Restricted Security Area Surveillance
Last updated
2024-02-12
Content type
Guides > Integration guides
Guides > Plugin and extension guides
Language
English
Product
Restricted Security Area Surveillance

Before you can monitor the restricted areas secured by your Blighter radar system in Security Center, you must add each Blighter server as a tracking system in Config Tool.

Before you begin

Procedure

  1. From the Config Tool homepage, open the Area view task.
  2. Click Add an entity (), and then select Tracking system.
    The Add tracking system wizard opens.
  3. On the Tracking system information page, enter the following information:
    Type
    Select Blighter.
    Name
    Enter a unique name for this tracking system.
  4. On the Communication page, enter the following information:
    IP address
    Enter the IP address of the BlighterView HMI server that connects to the tracking devices.
    Port
    The TCP/IP port that the plugin and the radar use to communicate.
  5. Click Refresh connection status () to connect.
  6. When the connection status turns Online (), click Next page ().
  7. On the RSA configuration page, enter the following information:
    Events
    Turn on the custom events that you want to monitor for this tracking system.
    NOTE: You can modify this later on the Properties page of the tracking system.
  8. Click Finish.
    The Blighter server and its devices are listed in the Area view entity tree.

After you finish

Create RSA zones.