Adding Navtech radars as tracking systems to Security Center - Restricted Security Area Surveillance

Before you can monitor the restricted areas secured by your Navtech radar system in Security Center, you must add each Navtech radar as a tracking system in Config Tool. If you are using the Inter-System Gateway (IS Gateway), you must first add your radar to a driver container in the IS Gateway, and then add the driver container as a tracking system in Config Tool.

To add your Navtech radar as a tracking system to Security Center with the IS Gateway:

1. Log on to the IS Gateway web portal:
   1. Open a web browser and enter the URL https://<GatewayServer>:4242.
      <GatewayServer> is the name or IP address of the server hosting the IS Gateway service. The default port is 4242. Use the port you configured at installation.
   2. Accept the security certificate.
   3. On the logon page, enter the Username and Password and click Sign in.
      The username and password were assigned during the Inter-System Gateway Configuration step of the IS Gateway service installation.
2. Add a driver container for the tracking system that you want to add to Security Center:
   1. On the homepage of the IS Gateway, click the Container () tab.
   2. Click the button besides the docker engine label, and then click Add driver container.
   3. In the Add Driver Container window that opens, enter the following information:
      

      Driver

      Select the driver that you want to install.

      Version

      Select the driver version that you want. The latest version is selected by default.

      Label

      Label used to identify this driver container in the list of containers on the left.

      Port

      Port used to communicate with the driver.

      Network adapter

      Select the network adapter used by the driver to communicate with the IS Gateway service.

      Show advanced

      Some drivers require other communication ports to be open. If necessary, click here to add those ports.

   4. Click Add.
      The IS Gateway immediately downloads the required driver container image from the repository. A notification is shown in the upper right corner of the browser page during the download process.

      

      After the download completes, the new driver container is displayed in the list of containers on the left, under the selected docker engine.

      
   5. Start the driver container. To do so, click the button beside the driver container label and click Start.
   NOTE: If you are adding multiple driver containers, make sure that each driver container has a unique port number. This will prevent any port conflicts if multiple driver containers are running at the same time.
3. Select the driver container corresponding to the tracking system that you want to add to Security Center.
4. In the Communication section, enter the following information:
   

   IP Address

   The IP address of the server that connects to the tracking devices.

   Port

   The TCP/IP port that the plugin and tracking system use to communicate.

   Auto-tracking

   When the option is turned on, PTZ cameras associated with the zones automatically follow a target as it moves. Leave this option off if you are using the RSA Surveillance plugin's auto-tracking feature.

5. In the Events section, turn on the custom events that you want to monitor for this tracking system.
6. Click Save.
7. Add your driver container as a tracking system to Security Center:
   1. From the Config Tool homepage, open the Plugins task.
   2. From the entity tree, select the Restricted Security Area Surveillance plugin role.
   3. Click Add an entity (), and select Tracking system.
      The Add tracking system dialog box opens.
   4. From the Type drop-down, select Inter-System Gateway.
   5. In the Name field, enter a name for your tracking system.
   6. From the Model drop-down, select the driver container you are adding and click Next ().
   7. If applicable, configure the specific settings for your driver and click Next ().
   8. If applicable, import the map from the third-party application and click Finish.
   9. Open the Area view task.
      After a few seconds, your tracking system () should be added to the area view.

To add your Navtech radar as a tracking system to Security Center without the IS Gateway:

1. From the Config Tool homepage, open the Area view task.
2. Click Add an entity (), and then select Tracking system.
   The Add tracking system wizard opens.
3. On the Tracking system information page, enter the following information:

   Type

   Select Navtech.

   Name

   Enter a unique name for this tracking system.

4. On the Communication page, enter the following information:

   Server

   Enter the IP address of the server that connects to the tracking devices.

   Port

   The TCP/IP port that the plugin and the radar use to communicate.

5. Click Refresh connection status () to connect.
6. When the connection status turns Online (), click Next page ().
7. On the RSA configuration page, enter the following information:

   Import on map

   Select the map that you want to use to display the devices in Security Center.

   Events

   Turn on the custom events that you want to monitor for this tracking system.

   NOTE: You can modify this later on the Properties page of the tracking system.

   Auto-tracking

   When the option is turned on, PTZ cameras associated with the zones automatically follow a target as it moves. Leave this option off if you are using the RSA Surveillance plugin's auto-tracking feature.