Configuring SIP settings for the Bosch intercom - Sipelia 2.11 - 2.13

To configure SIP settings for the Bosch device, do the following:

1. Under the SIP section, go to SIP Settings.

2. Select SIP service enabled

3. Ensure the rest of the settings are configured as follows:

Note: Ensure that Unique contact user in SIP header is disabled.

4. Click Save.

5. In the SIP section, go to SIP accounts.

6. Cick (+) to create a new account.

7. In the Username field, enter the extension that was assigned when you added the SIP intercom in Security Center.

8. In the Password field, enter the password that was set when you added the SIP intercom in Security Center.

9. In the Registrar field, enter the IP address of the Sipelia Server.