Configuring the SpotterRF push script with a legacy driver - Restricted Security Area Surveillance

The SpotterRF NetworkedIO application must be configured to push data to Security Center using an action script called Push Spotter tracks.json.

1. Log on to the NetworkedIO application.
2. Create an action script:
   1. Click Actions in the sidebar and then click the plus sign at the top right of that menu.
   2. In Script, enter the name Genetec.
   3. In Type, select Script.
   4. In the Settings section, from the Script list, select Push radar tracks.json.
      
   5. Enter the following information:

      Host

      IP address of the Security Center expansion server that runs the RSA Surveillance plugin.

      Port

      Listening port number for the RSA Surveillance HTTP server.

      Path

      Enter /tracks.

      Username

      Username configured for this SpotterRF tracking system.

      Password

      Password configured for this SpotterRF tracking system.

      CAUTION:

      For an update, you must re-enter the password. If you leave the password blank, the existing password will be erased.

   6. Click Add > Save.
3. Configure the action for the SpotterRF default zone.
   1. Select the zone option in the sidebar menu, and then select the zone to which the action should be added.
   2. From the Actions list, select the plus sign to add an action.
   3. Under Type, select Push radar tracks.json.
   4. Click Add > Save.