Enabling Transport Layer Security (TLS) - SV Control Panel | Streamvault

Streamvault™ Appliance User Guide

Product
Streamvault
Content type
Guides > User guides
Language
English
Last updated
2024-07-16

The Transport Layer Security (TLS) 1.0 and 1.1 protocols have several major vulnerabilities, so they are disabled on Streamvault™ appliances. When a device enrolled in Security Center requires one of these protocols for communication, you must enable the protocol on your appliance.

What you should know

  • TLS 1.1 is disabled in Streamvault software image 16.3 and later.
  • TLS 1.0 is disabled in Streamvault software image 16.0 and later.
  • Enable only the version of TLS that your device requires.
  • Enable TLS on the server (incoming) and client (outgoing) nodes.
  • For security reasons, the Internet Properties options are disabled on appliances. You can only enable TLS from the Windows Registry Editor.

Procedure

  1. Open Windows Registry Editor.
  2. Enable TLS 1.n, where n represents the minor version number:
    1. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.n.
    2. Select the Server node, set DisabledByDefault to 0, and set Enabled to 1.
    3. Select the Client node, set DisabledByDefault to 0, and set Enabled to 1.
  3. Restart Windows.