By default, the SharpZ3 base unit and modules communicate using their default static IP addresses and no configuration is necessary. If required, you can define new static IP addresses within a specific range.
Before you begin
What you should know
In an example using a 192.168.0.X range, the following addresses are required when all SharpZ3 expansion slots are in use:
Module | Default static IP addres |
---|---|
ALPR module ports 1 and 2 | 192.168.0.1 |
ALPR module ports 3 and 4 | 192.168.0.2 |
EXP 1: Navigation expansion module | 192.168.0.30 |
EXP 2: AUX PoE expansion module 1 | 192.168.0.40 192.168.0.41 (Port 1) 192.168.0.42 (Port 2) 192.168.0.43 (Port 3) 192.168.0.44 (Port 4) |
EXP 3: AUX PoE expansion module 2 | 192.168.0.50 192.168.0.51 (Port 1) 192.168.0.52 (Port 2) 192.168.0.53 (Port 3) 192.168.0.54 (Port 4) |