Configuring inputs and outputs for Vanderbilt SPC Intrusion Panel integration - Vanderbilt SPC Intrusion Panel 3.3.0

Vanderbilt SPC Intrusion Panel Extension Guide 3.3.0
Product
Vanderbilt SPC Intrusion Panel
Content type
Guides > Plugin and extension guides
Version
3.3
Release
3.3.0
Language
English
Last updated
2024-05-27

In the intrusion detection unit Peripherals tab, you can assign logical IDs and descriptions to the inputs (zones) and outputs (relays) controlled by the unit.

What you should know

  • Inputs and outputs must be renamed in the SPC Pro application.
    NOTE: If inputs are renamed in Security Center, the names in Security Center will be overwritten the next time the panel is re-connected.

Procedure

  1. From the Config Tool homepage, open the Intrusion detection task.
  2. Select the intrusion detection unit to configure, and click the Peripherals tab.
  3. Select an input, and at the bottom of the Peripherals tab, click .
  4. In the Name field, the name of the input connected to the panel is displayed.
  5. Enter a Logical ID for the input.
    Setting a Logical ID helps you to easily identify the input in Security Center.
  6. Enter a Description for the input.
  7. Click OK, and then click Apply.
  8. Select an output, and at the bottom of the Peripherals tab, click .
  9. In the Name field, the name of the output connected to the panel is displayed.
  10. Enter a Logical ID for the output.
    Setting a Logical ID helps you to easily identify the output in Security Center.
  11. Enter a Description for the output.
  12. Click OK, and then click Apply.