Mounting the Cloud Link Roadrunner unit on a surface or c-channel rail - Cloud Link Roadrunner

Cloud Link Roadrunner™ Hardware Installation Guide
Applies to
Cloud Link Roadrunner
Last updated
2023-08-02
Content type
Guides > Installation guides
Language
English
Product
Cloud Link Roadrunner™

Using the included surface mount flanges, you can mount Cloud Link Roadrunner™ on a surface or c-channel rail in the enclosure.

What you should know

  • Screws for securing the mounting flanges to the c-channel rail or panel are not provided. The mounting flange holes accept screws up to M6 (¼-20).

Procedure

  1. Partially install two of the provided screws (pan-head with integrated washer) on each side of the unit.
  2. Insert the surface mount flanges, adjust the mounting height as required, then tighten the screws until the washers are compressed.
  3. Secure the flanges to the c-channel rail or other mounting surface using the appropriate hardware (not provided).