Cannot watch playback video in Security Desk - If you can’t view playback video or video archives in Security Desk, you can troubleshoot the issue. - Security Center 5.9 - 5.13

If you can’t view playback video or video archives in Security Desk, you can troubleshoot the issue.

1. Try viewing live video from the same camera: in the Security Desk Monitoring task, drag the camera from the Area view to a tile in the canvas.
   • If you can view live video, continue with the next troubleshooting step.
   • If you can’t view any video, you most likely have a network issue. See Video units offline in Security Center.
2. Try viewing playback video from the Archives task:
   1. In the Security Desk Archives task, select your camera.
   2. Search for video archives at different dates and times and click Generate report.
   3. After the report is generated, try to view video from the archives.
   4. Repeat these steps with other cameras that are connected to the same Archiver.
   • If you can view the video from some of the video archives, continue with the next troubleshooting step.
   • If you can’t view any video, skip the next troubleshooting step.
3. Verify that Security Center supports the unit and that the unit is running the certified firmware.
   For a list of video units supported by Security Center, see our Supported Device List.
4. Try viewing playback video from the Archives task on both another Security Desk and the server where the Archiver role is running.
   • If you can view video, it might be a problem with the redirection from the Media Router to your Security Desk. Continue with the next troubleshooting step.
   • If you can’t view any video, contact the Genetec™ Technical Assistance Center.
5. Make sure that the correct ports are open on your network so that no firewall blocks the video stream.
   For more information, see Default ports used by Security Center.
6. If you still can’t view playback video, contact the Genetec Technical Assistance Center.