Attaching the target to the tripod - SharpZ3 13.0 - 13.3

AutoVu™ Mobility Kit - SharpZ3 Hardware Installation Guide

Product
SharpZ3
Content type
Guides > Installation guides
Version
13.3
13.2
13.1
13.0
ft:locale
en-US
Last updated
2021-02-02

After you determine where to set up the tripod, you must attach the target to it, and raise it to the proper height for camera alignment.

Procedure

  1. Attach the three-arm knob to the tripod base using the provided wing nut.
  2. Attach the plastic thumb-head screw to the wing nut (both sides).
  3. Raise the tripod to its full length. The center of the target should be 36 in. (0.9 m) from the ground.