How you power up the AutoVu™ Mobility Kit depends on
how power is supplied to the kit.
Procedure
To power up a kit with a hardwired system controlled by the vehicle’s
ignition (green wire):
-
Leave the Power button OFF.
Power will be supplied to the system when the ignition is turned on.
NOTE:
- This is the preferred method to supply power and allows the unit to
perform an orderly shutdown when the ignition is turned off.
- If the ignition is turned off, you can bypass the ignition control
and supply power to the AutoVu™ Mobility Kit by turning the Power
button ON. This does not apply if the system
is powered by an ignition-controlled cigarette lighter socket.
WARNING: If you bypass ignition control using this method,
you must remember to turn the system off. Power will be drained from the
battery until auto shutdown.
To power up a kit powered by a cigarette lighter socket that is controlled
by the ignition:
To power up a kit powered by a cigarette lighter socket that is not
controlled by the ignition (always ON):
-
Use the Power button to turn the system ON and
OFF.
WARNING: If you forget to turn the system off, power will be drained
from the battery until auto shutdown.