Configuring the network properties of the Cloud Link Roadrunner™ unit - Cloud Link Roadrunner™ 2.0.4

Cloud Link Roadrunner™ User Guide 2.0.4

Applies to
Cloud Link Roadrunner™ 2.0.4
Last updated
2022-09-15
Content type
Guides > User guides
Language
English
Product
Cloud Link Roadrunner™
Version
2.0

To make sure the Cloud Link Roadrunner™ unit can be reached on your Security Center system’s network, you must configure the unit's network properties.

Procedure

  1. Log on to the Cloud Link Roadrunner™ unit.
  2. Click Configuration > Network.
  3. In the Access Manager settings section, change the Discovery port if necessary.
  4. In the Network settings section, configure the unit’s IP address and network properties.
    IMPORTANT: If the Cloud Link Roadrunner™ unit is not on the same network segment as the Access Manager, then the unit's IP address must be set to Static IP or DHCP with Static IP allocation.
  5. Click Save.

Results

The unit restarts, and you are automatically redirected to its new IP address.