Configuring floor security levels in the Thyssenkruppplugin - Thyssenkrupp 3.2.0

To secure floors and landings, and to configure which destinations are available from certain sources, you must set access levels in the custom Thyssenkrupp security levels task in Security Center.

What you should know

The custom Thyssenkrupp security levels task is available in both Config Tool and Security Desk.

1. From the home page in Config Tool or Security Desk, open the Thyssenkrupp security levels task.
2. From the entity browser, select the floor or landing you want to configure.
3. From the Default access options, select one of the following choices:
   • (Landings only) Inherit
   • Secured
   • Unsecured
   For landings, the Inherit setting matches the setting for the parent floor.

   
   
   
4. In the Access levels section, click Add ().
   The Access level window opens.
5. Configure the settings in the Access levels window:

   Name

   Enter a name for this access level.

   Source

   Select the DED from which the rule is applied. You can also set the source to Any, which will set the rule for any DED.

   Schedule

   Select the schedule to determine when this rule is active.

   Access

   Select whether the scheduled access is secured or unsecured.

   
   
   
6. Click OK.
7. (Optional) Repeat steps 2 to 6 to add more rules to the floor or landing.
   NOTE: You can have multiple rules active at the same time. For example, an unsecured Always rule and a secured Only during Weekdays rule. When rules overlap, schedule conflict rules apply. For more on schedule conflicts, see About schedules.
8. Click Apply.