To learn which Security Center intrusion detection features are supported with the DSC PowerSeries intrusion panel, you can view a list of supported features.
The following table lists the standard features for all
Security
Center intrusion detection integrations.
For each feature, one of the following is shown:
- Yes
- Feature is offered by the intrusion panel, and is available in Security Center.
- No
- Feature is offered by the intrusion panel, but is unavailable in Security Center.
- Not applicable
- Feature is not offered by the intrusion panel.
| Feature | Supported | |
|---|---|---|
| Communications | ||
| Serial connection | Yes | |
| TCP/IP connection | No | |
| Data encryption over TCP/IP | No | |
| Status monitoring | ||
| Report online and offline status of intrusion units in real time | Not applicable | |
| Intrusion detection area states | Master armed | Yes |
| Perimeter armed | Yes | |
| Alarm silenced | No | |
| Disarmed | Yes | |
| Ready-to-arm | Yes | |
| Intrusion alarm active | Yes | |
| Input trouble | Yes | |
| Entry delay | Yes | |
| Near real-time status monitoring of inputs and outputs | Yes | |
| Input entity states | Normal | Yes |
| Active | Yes | |
| Trouble | Yes | |
| Alarm | Yes | |
| Bypassed | Bypassed area can be detected; however, the exact input is not available. | |
| Event reporting | ||
| Report events from offline units automatically upon reconnection | No | |
| Intrusion detection unit events | Unit connected | Yes |
| Unit lost | Yes | |
| AC fail | Yes | |
| Battery fail | Yes | |
| Tamper | Yes | |
| Intrusion detection area events | Master armed | Yes |
| Perimeter armed | Yes | |
| Disarmed | Yes | |
| Auto-arming postponed | No | |
| Forced arming | No | |
| Duress | Yes | |
| Entry delay started | Yes | |
| Intrusion alarm silenced | No | |
| Intrusion alarm activated | Yes | |
| Controlling units and devices | ||
| Trigger alarms on intrusion areas | No, but you can trigger Fire, Aux, and Panic alarms. | |
| Silence alarms from intrusion areas | No | |
| Acknowledge alarms from intrusion areas | No | |
| Arm areas | Instant master | No |
| Delayed master | Defined by panel configuration | |
| Arming delay (Override default delay) | No | |
| Instant perimeter | No | |
| Delayed perimeter | Defined by panel configuration | |
| Forced | No | |
| Bypass | No | |
| Set inputs to bypass mode | No | |
| Trigger outputs on intrusion units | Yes | |
| Configuration | ||
| Authentication between intrusion unit and Intrusion Manager role | No | |
| Create intrusion detection areas automatically | No | |
| Create input entities automatically | No | |
| Create output entities automatically | No | |
| Link input entities to intrusion detection areas automatically | No | |
| Associate custom events to incoming PIN events | No | |
| Keep clock on panel synchronized with Security Center | Yes | |
| Link cardholders to users on the intrusion unit | Not applicable | |
| Modify user PIN credentials | No | |