Mounting the Synergis Cloud Link appliance - Synergis Cloud Link

You can use the mounting holes on the Synergis™ Cloud Link to mount the appliance to a suitable flat surface. Alternatively, you can mount the appliance to a DIN rail using the optional DIN rail mounting bracket.

To install the Synergis Cloud Link on a flat surface:

1. Install the appliance using the provided self-drilling screws (#6 x 3/8") or machine screws (#6-32 x 3/8").
   NOTE: If your installation requires any other type or length of fasteners, use #6 (M3.5) screws.
   
   In this example, the provided self-drilling screws are installed using a 6 mm (0.25 in) socket.
   
   IMPORTANT: If you are mounting the appliance to a surface that is not grounded, you must connect a ground wire to one of the mounting screws. For more information, see Synergis Cloud Link connections.

To install the Synergis Cloud Link on a DIN rail:

1. Attach the optional DIN rail bracket to the Synergis Cloud Link using the screws and lock washers included with the kit.
   
2. Hook the bottom of the bracket to the DIN rail and rotate to engage the clip.
   Tip: Hook the spring behind the DIN rail.