Associating readers to destination input devices - MCE Sentry Destination Dispatch 3.0.0

To manage access to MCE floor landings, you must associate a reader from your Security Center system with a destination input device.

1. From the home page in Config Tool, open the Plugins task.
2. Click the Properties tab.
   
3. In the Configuration section, configure the following:

   Reader ID

   This field displays the reader ID that was assigned to the destination input device when it was added to the plugin. If required, the ID can be changed by entering a unique number between 1 and 127.

   Readers

   To associate a reader from your Security Center system with the selected destination input device, click Add (), select a reader, then click OK.

   NOTE: The reader must be associated with a door in Security Center. If it is not, you will not receive events.

   Reader location

   If the reader is located on a landing, select Hallway from the list. If the reader is located inside an elevator, select an MCE Sentry elevator car from the list.

   Landing

   Select the MCE floor marking related to the landing.

   NOTE: This setting is only displayed if Hallway is selected from the Reader location list.

   Turnstile

   To have cardholders brought directly to their home floor automatically after swiping their card at a reader, turn on the Turnstile option.

   NOTE: This setting is only displayed if Hallway is selected from the Reader location list.

4. Click Apply.