Configuring Axis P7701 units - Security Center 5.10.4.0

Before adding Axis P7701 units to Security Center, you must complete some pre-configuration steps.

1. Open the unit's web page.
2. Click Video & Audio > General Setup.
3. Depending on the video output mode required, do one of the following:
   • If composite output mode is required, select Composite from the Video output option.
     NOTE: NTSC and PAL will be the only Analog format options available in Config Tool.
   • If VGA and DVI output mode is required, do the following:
     1. From the Video output drop-down list, select VGA and DVI.
     2. From the TV system drop-down list, select the required analog format.
        NOTE: NTSC and PAL will be disabled as Analog format options in Config Tool.
4. Click Save.