Configuring the Panasonic WV-CU980 Ethernet keyboard - Security Center 5.10.4.0

Security Center Video Unit Configuration Guide 5.10.4.0
Product
Security Center
Content type
Guides > User guides
Version
5.10
Release
5.10.4.0
Language
English
Last updated
2023-02-01

You must configure the Panasonic WV-CU980 Ethernet keyboard before using it in Security Desk.

Procedure

To configure the Panasonic WV-CU980 Ethernet keyboard:

  1. Plug the controller into a power source.
  2. Press the MENU button.
  3. Press twice and the LCD will display the Network Setup.
  4. Press CAM (SET) twice.
  5. Enter the device IP address by pressing CAM (SET) after each digit.
  6. Press .
    The Subnet Mask displays.
  7. Enter device subnet by pressing CAM (SET) after each digit.
  8. Press .
    The Gateway displays.
  9. Enter the gateway address by pressing CAM (SET) after each digit.
  10. Press .
    The Server IP Address displays.
  11. Enter the Security Desk IP address by pressing CAM (SET) after each digit.
  12. Press .
    The Communicat Mode displays.
  13. Select CU950 compatible by pressing CAM (SET), and then .
  14. Press .
  15. Press EXIT.

Auto Login (Optional)

  1. Press the MENU button.
  2. Press three times and the LCD will display the Auto Login Setup.
  3. Press CAM (SET) twice.
  4. Press until the LCD displays Login Admin.
  5. Press CAM (SET) twice to confirm your settings.