Using Genetec™ lightbar brackets, you can mount up to four SharpZ3 cameras on the patrol vehicle.
Lightbar mounting bracket overview
Before installing the lightbar bracket on the patrol vehicle's lightbar, familiarize yourself with components:
Component | Description | |
---|---|---|
A | Patrol vehicle lightbar | To verify that your lightbar is compatible with the lightbar bracket, contact your AutoVu™ Sales representative. |
B | Tilt bracket | Provides vertical tilt adjustment and some roll adjustment. |
C | Pan bracket | Provides horizontal pan adjustment. You can connect the pan bracket to the left or right side of the tilt bracket. |
D | Mounting bolts | Use the mounting bolts included with the hardware. |
E | Slide bars | Compatible lightbars include slotted slide bars so that you can adjust the position of the mounting bolts. |
F | Spacer plate | The spacer plate must be rotated according to which side of the
vehicle it is being installed on as shown in the diagram. NOTE: For
some lightbar models, the spacer plate is unnecessary. For
information on the hardware required for your lightbar, refer to
the documentation included with the lightbar camera
bracket.
|
G | Mounting base | The lightbar mounting bracket is installed between the lightbar and the mounting base. |
Watch this video to learn more. Click the Captions icon (CC) to turn on video captions in one of the available languages.