To control SharpZ3 camera selection using the AutoVu™ car camera switch, you must mount the switch in
an accessible location in the patrol vehicle.
Procedure
-
Decide on a mounting location.
NOTE:
- The switch can be installed anywhere in the patrol vehicle that is
safely within reach of the driver. For vehicles that include an
in-vehicle computer, the mounting arm usually provides a convenient
mounting location.
- If the supplied mounting accessories are not appropriate for your
selected mounting location, you can use any components from RAM®
Mounts that are compatible with the 1-inch mounting ball on the car
switch.
-
Run the car switch cable from the mounting location to the base unit.
NOTE: The pigtail end of the cable is connected to the base unit and the cable
connector connects to the car switch.
-
Assemble the supplied mounting accessories according to the instructions
included with the hardware.
