Creating areas to represent your building - KONE Destination Dispatch 3.0

KONE Destination Dispatch Plugin Guide 3.0.0

Product
KONE Destination Dispatch
Content type
Guides > Plugin and extension guides
Version
3.0
Release
3.0.0
Language
English
Last updated
2021-10-15

To visualize the building where your elevator groups are located, you must create a representation of your building in Security Center.

What you should know

Pulling information about buildings from the KONE Destination Dispatch system is not supported. You must recreate your building manually in Security Center.

Procedure

  1. From the home page in Config Tool, open the Area view task.
  2. Create an area to represent your building.
  3. Create an area to represent each floor in your building.
    NOTE: Each floor should be a child entity of the area that represents your building.
  4. For each reader you want to use with the plugin, add and configure a door where the reader is located in the building.For each reader you want to use with the plugin, add and configure a door where the reader is located in the building. For more information on creating doors, consult the Security Center Administration Guide.
    NOTE: A door is required if you want to register a reader from an access control unit and apply access rules to it. The door represents a kiosk with an associated reader that can be monitored.
  5. Add floor markings to each floor.
  6. Add kiosks to floor markings.
  7. Add cameras to kiosks.
  8. Assign access rules to cardholders and cardholder groups so they can access floors.