Adding cameras to Auxiliary Archiver roles - Security Center 5.10

For the Auxiliary Archiver to create video archives, you must add cameras to be controlled by the role.

1. Open the Video task, and select the Archiver role to configure.
2. Select the Auxiliary Archiver, click the Cameras tab, and click Add an item ().
3. In the dialog box that opens, select the cameras you want and click OK.
   NOTE: It takes a few seconds for the selected cameras to be added. If the role is unable to add a camera in the given time, a failed status is indicated, and the camera is removed.
4. Click Apply.
5. To override the default recording settings on a camera:
   1. Select the camera from the list and click Jump to ().
      The camera configuration page is selected.
   2. From the Recording tab of the camera, select the tab that corresponds to the current Auxiliary Archiver.
   3. Under Recording settings, click Custom settings, and make the necessary changes.
   4. Click Apply.