If you order a black SharpV, it is shipped with a sunshield that is pre-installed on the camera. To avoid damaging the SharpV, you must use the correct mounting bolts.
WARNING:
- For top-mounted installations, when attaching the SharpV to the provided mounting bracket, you must remove the 16 mm bolts and use the provided 25 mm bolts.
- When tightening the mounting bolts, ensure that the torque does not exceed 4N-m (3ft-lb). The camera body can be permanently damaged if you exceed the maximum bolt torque.
- If you remove the sunshield, discard the 25 mm bolts. Using the 25 mm bolts without the sunshield can damage the mounting hole threads. We do not honor warranty claims for stripped mounting holes.
| A | Mounting bolts | Use 25 mm bolts only when mounting a SharpV, that has a sunshield, in the top-mounted position. |
| B | Sunshield | A sunshield is included with black SharpV cameras and are required for outdoor installations. |