Assigning cameras to intrusion detection areas - Genetec™ Intrusion Protocol 5.0.0

Genetec™ Intrusion Protocol Extension Guide 5.0.0

Applies to
Genetec™ Intrusion Protocol 5.0.0
Last updated
Content type
Guides > Plugin and extension guides
Genetec™ Intrusion Protocol

By linking cameras to intrusion detection areas, the video footage associated with an intrusion event can be displayed and reviewed in Security Desk.

What you should know

When cameras are associated to the intrusion detection area and an event occurs, the most relevant camera is shown first in the monitoring tile. For example, when an area event occurs, only the cameras assigned to the area are shown in the monitoring tile. When an input event occurs, the camera assigned to the input is displayed first, and the cameras assigned to the area are displayed in the other tiles. You can cycle or unpack the tile to display the video from the other cameras.


  1. From the Config Tool home page, open the Area view task.
  2. Select the intrusion detection area to configure, and then click the Cameras tab.
  3. Click Add an item ().
  4. In the dialog box that opens, select a camera, and then click OK.
    The camera is added to the Cameras list.