If the Genetec™ Intrusion Bridge is set to
connect to the highest priority hub, you must adjust the priority of your hubs when failover
occurs. Otherwise, the Genetec Intrusion Bridge
will be unable to reconnect to the Genetec™ Intrusion Protocol extension.
What you should know
When the Genetec Intrusion Bridge is
configured to connect to the highest priority hub, it automatically connects to the hub
located at the top of the list on the page.
Procedure
-
From you web browser, navigate to the Genetec Intrusion Bridge webpage.
-
Click the Configuration tab, select Hubs from
the panel on the left side.
-
Use the up and down arrows to adjust the priority of the hubs.
-
Click Apply.