Configuring PTZ for Bosch MIC-9000 units - Security Center

Security Center Video Unit Configuration Guide

Applies to
Security Center
Last updated
Content type
Guides > User guides
Security Center

The MIC 9000 unit might register as two non-PTZ cameras. To use PTZ controls for the Bosch MIC-9000 unit, you must first configure the cameras in Security Center.

Before you begin

If the unit already exists in Config Tool, delete it.


  1. Open the Video task in Config Tool.
  2. Select the Archiver and click Add an entity > Video unit.
  3. Expand the unit and select the first camera.
  4. Click the Hardware tab.
  5. Turn on the PTZ option.
  6. From the Protocol drop-down list, select Philips.
  7. Set the serial port to the one associated with the unit. The PTZ address won’t change.
  8. Click Apply.
  9. Select the second camera, and repeat the configuration steps.