Monitoring the battery status of WiFi locks - Synergis™ Softwire 11.2

Synergis™ Softwire Integration Guide 11.2

Applies to
Synergis™ Softwire 11.2
Last updated
Content type
Guides > Integration guides
Synergis™ Softwire
Integration guides

To check the status of the battery on an Assa Abloy IP WiFi lock, you can monitor the Battery fail event on the Synergis™ unit that it is connected to.

What you should know

For each WiFi lock, Security Center creates a virtual input named Input BatteryFail that shows as Active in the Monitoring tab and yellow warning on the System messages icon in the notification tray when the battery is low.
NOTE: Input BatteryFail is a software input created to indicate the battery status of WiFi locks. You cannot connect any physical device to this input.


  1. From the Security Desk home page, open the System status task.
  2. From the Monitor list, select Doors.
  3. In the entity tree, select the parent area.
  4. Select the Search member entities check box to display all the locks under the child areas.
  5. In the Show list, select All health issues to show the doors with warnings.
    NOTE: The WiFi locks that have battery problems will show an Active state for the Input BatteryFailed input.
  6. Schedule a battery replacement for the WiFi locks that have the low battery warning.