SimonsVoss SmartIntego lock integration requires a Mercury EP or LP (or Honeywell) controller. If the SmartIntego locks are disconnected from their controller, the locks cannot grant access or store offline events.
- Feature is offered by the interface module and is supported by Synergis™ Softwire.
- Feature is offered by the interface module but is not supported by Synergis™ Softwire.
- Not applicable
- Feature is not offered by the interface module.
|Category of interface module||Electronic lock|
|Communication protocol1||IP, radio|
|Online operation (connected to the Synergis™ unit)||Not applicable|
|Offline operation (no connection to the Synergis™ unit)||Not applicable|
|Reader communication protocols||Not applicable|
|Maximum credential length (in bits)||644|
|Recommended maximum number of interface modules per Synergis™ unit||Not applicable5|
1 The Gateway node communicates with the Synergis™ unit over IP. The Gateway node communicates with the wireless locks over radio.
2 All SmartIntego wireless locks communicates over a 868 MHz channel using AES-128 bit encryption.
3 Requires the Gateway node (communication module).
4 The credential limit of the default configuration. Up to eight different credential lengths are supported.
5 In the SimonsVoss lock integration, it is the Mercury controller that is viewed as the interface module, not the SimonsVoss lock. For the recommended number of Mercury EP or LP controllers per Synergis™ unit, see Supported Mercury controller features in Synergis™ Softwire 11.2.