Intrusion detection area widget - Security Center 5.11

Security Center User Guide 5.11

Product

Security Center

Content type

Guides > User guides

Version

5.11

Language

English

Last updated

2024-07-05

When an intrusion detection area is displayed in a tile in Security Desk, you can arm or disarm the area, and interact with intrusion alarms using the Intrusion detection area widget.

The Intrusion detection area widget is described in the following table:

NOTE: Some commands might be unavailable if you lack a necessary privilege, or the command is not supported by the intrusion panel you are using.

Button	Command	Description
	Disarm	Disarm the area, by causing all sensors attributed to the selected intrusion detection area to be ignored by the intrusion panel.
	Arm	Arms the intrusion detection area. The following options are available: Master Arms all sensors in the intrusion detection area. Any sensor can trigger the alarm when activated. Perimeter Arms only the sensors designated to be on the perimeter. Activity on sensors inside the area, such as motion detectors, is ignored. Instant Arms the area immediately. Delay Arms the area after a delay. If you do not specify a specific duration, the panel default is used. Force If the area is not ready for normal arming, this option forcefully arms the area. Force temporarily ignores active or troubled sensors during the arming sequence. If an ignored sensor ever returns to a normal state while armed, future activity can trigger the alarm. Bypass If the area is not ready for normal arming, this option automatically bypasses active or troubled sensors before arming the area. Sensors remain bypassed while the area is armed. Disarming the area removes the bypass.
	Trigger intrusion alarm	Trigger an intrusion alarm on the selected intrusion detection area. NOTE: Additional configuration is required to use this feature.
	Silence alarm	If there is an active alarm on the selected intrusion detection area, stop the siren on the intrusion panel from beeping. Depending on your intrusion panel and the type of alarm, clicking Silence alarm might also acknowledge the alarm. For example, with Bosch intrusion panels using Mode 2, Burglary alarms are acknowledged from Security Desk.
	Acknowledge alarm	Acknowledge the intrusion alarm on the selected intrusion detection area.