It is recommended to enable IP address filtering on the Axis controller to allow the IP addresses of the Synergis™ unit and of the admin workstation to connect to the controller.
Before you begin
- Make sure you get the latest Axis firmware package.
- Follow the latest Product Security recommendations from Axis Communications.
- Enroll the Axis controllers.
Log on to the Axis controller web portal.
For more information, see the Axis documentation.
- Click .
- Select the Enable IP address filtering option, and select Allow from the list.
- Click Apply.
In the Filtered IP Addresses list, add the IP address of the
Synergis™ unit and the IP address of the
administrative workstation that must log on to the Axis controller web portal.
Under System options, click , and disable both FTP server and
RTSP server options.
They are not used by Synergis™ Softwire.
- Click Save.