Configuring the ClearID Self-Service Kiosk label printer for Ethernet mode (Brother TD-4550DNWB) - ClearID

Before visitors can use the Genetec ClearID™ Self-Service Kiosk to check in, you must configure the label printer so that labels can be printed during the check-in process.

Before you begin

Familiarize yourself with the following:

• Brother TD-4550DNWB Quick Setup Guide
• Brother TD-4550DNWB User Guide
• Brother TD-4550DNWB online User Guide (HTML)
• Brother TD-4550DNWB LED status indicators

1. Plug printer AC adapter into a power outlet and connect the power lead to the label printer.
   
2. Make sure that the printer is turned OFF before connecting the LAN cable.
   
   1. Connect a LAN cable to the LAN port on the back of the printer.
      Tip: Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.
3. Press the Power button to turn the label printer on.
   
4. Press the Menu button.
   
5. Use the arrow buttons to navigate the label printer menu.
   
6. From the label printer Settings menu, turn OFF WLAN (Wi-Fi).
   
7. From the label printer Settings menu, turn OFF Bluetooth.
   
8. Scroll down to the Wired LAN (5/8) settings and press OK.
   
   1. Click TCP/IP Settings and select AUTO.
      
   2. Click Wired LAN Status to check your printer.
      
   3. Check your connection Status, IPConfig, and IP Addr.
      

      Tip: Make a note of your IP address and other settings for later use when selecting your printer.
9. Select your label printer (Ethernet).