About intrusion detection areas - Security Center 5.11

Security Center Administrator Guide 5.11

Product
Security Center
Content type
Guides > Administrator guides
Version
5.11
Language
English
Last updated
2024-07-05

An intrusion detection area entity represents a zone (sometimes called an area) or a partition (group of sensors) on an intrusion panel.

Intrusion detection areas might be created automatically by the Intrusion Manager role when the intrusion panels on which they are configured are enrolled in your system.

You can assign cameras to intrusion detection areas and intrusion detection inputs for monitoring purposes in Security Desk and you can configure the mapping of an output relay to an input pin for virtual alarms. Intrusion detection areas are automatically updated when the zones they correspond to are updated on the intrusion panels.

Users can perform the following actions on intrusion detection areas:
NOTE: You might not be able to perform some of these actions, depending on the type of intrusion panel you are using.
Master arm
Master arm is arming an intrusion detection area in such a way that all sensors attributed to the area would set the alarm off if one of them is triggered. Some manufacturers call this arming mode “Away arming”.
Perimeter arm
Perimeter arm is arming an intrusion detection area in such a way that only sensors attributed to the area perimeter set the alarm off if triggered. Other sensors, such as motion sensors inside the area, are ignored.
Disarm
Disarm the area, by causing all sensors attributed to the selected intrusion detection area to be ignored by the intrusion panel.
Trigger intrusion alarm
Trigger an intrusion alarm on the selected intrusion detection area.
Silence alarm
If there is an active alarm on the selected intrusion detection area, stop the siren on the intrusion panel from beeping. Depending on your intrusion panel and the type of alarm, clicking Silence alarm might also acknowledge the alarm.
Acknowledge alarm
Acknowledge the intrusion alarm on the selected intrusion detection area.