Migrating ALPR images to another server - Security Center 5.11

Security Center Administrator Guide 5.11

Product
Security Center
Content type
Guides > Administrator guides
Version
5.11
Language
English
Last updated
2024-07-05

If the server hosting the ALPR images fails, or has limited disk space, you must manually transfer the ALPR images and the corresponding Archiver role to a new or more adequate server.

Before you begin

Make sure you have another server configured and ready to accept a new role.

What you should know

  • Depending on the amount of data being re-indexed, and depending on your hardware, ALPR image migration might take several hours.
  • The ALPR images are managed by an Archiver role assigned to the ALPR Manager. The images are stored as G64 files in the VideoArchives folder on the server. The ALPR images must be transferred manually as the Archive transfer task does not yet support the G64 files containing ALPR images.
    WARNING: If you change the Archiver entity in ALPR Manager > Resources > Images saved to tab without completing the following steps, you will lose all the images.

Procedure

  1. Back up the Archiver SQL database.
  2. Deactivate the Archiver role on the old server:
    1. In the Config Tool Video task, select the Archiver.
    2. At the bottom of the Video task, click Maintenance > Deactivate role ().
    3. In the confirmation dialog box, click Continue.
      The Archiver and all video units controlled by the role turn red.
  3. Manually move the video archives from C:\VideoArchives\Archiver to the desired location on the new server.
  4. On the new server, transfer the files to the desired location.
  5. If the location of the G64 files on the new server is the same as that on the original server, restore Archiver SQL Database.
  6. If the location of the G64 files on the new server is different from that of the original server, re-index these files in the Archiver database using the VideoFileAnalyzer.exe tool.
  7. Activate the Archiver role on the new server:
    1. In the Config Tool Video task, select the Archiver.
    2. At the bottom of the Video task, click Maintenance > Activate role ().
    3. In the confirmation dialog box, click Continue.
  8. Click the Resources tab.
  9. In the Server list, select the new server.